Legion ADC
The LEGION ADC modules were designed for massive parallel data acquisition utilized in photoacoustic, laser-induced ultrasound, and X-ray acoustic real-time imaging applications. The LEGION ADC module offers fully parallel operation for simultaneous data acquisition from all channels without multiplexing in an ultra-compact enclosure connected via USB 3.0. Each unit supports 128- or 256-element detectors. Up to four ADC units can be operated in parallel to enable 1024 data acquisition channels. If more channels are desired, up to 32 units can be operated in parallel with the use of a synchronization hub (LEGION Hub) leading to an unprecedented 8192 channels. Independent programmable gain control is available for each channel, and analog signals can also be further amplified by a fixed 34 or 40 dB using optional, integrated preamplifiers. The LEGION ADC HD improves the analog bandwidth and sampling of the LEGION ADC and is currently available with 128 data acquisition channels.
Streaming ADCs for continuous data acquisition with no buffering or multiplexing
Trigger output can be generated at a defined rate or based on the external trigger input with programmable delay
Standalone control software written in MATLAB, with the open SDK written in C#
Compact, durable, and light enclosures with integrated cooling fans
Each analog channel has an integrated amplifier with digitally controlled gain
Connect up to four units in parallel and acquire more data at fast data acquisition rates
Sync external hardware with data acquisition using electronic or optical IN/OUT ports
Access to raw RF data
- Photoacoustics (Optoacoustics)
- X-ray Induced Acoustics
- Thermoacoustics
- Acoustoelectrics
- 3D Tomography
- Photoacoustic Microscopy (PAM)
- 2D Imaging
- Multi-Sensor Monitoring
- Non-Destructive Testing
- Transducer Manufacturing
- Low Voltage Ultrasonics
Specifications
Legion
-
128/256-channels
-
9 to 48 dB programmable gain (49-88 dB w/ optional preamplifiers)
-
12.5 kHz to 25 MHz analog bandwidth (40 kHz to 25 MHz w/ optional preamplifiers)
-
12-bit resolution
-
40 MSPS sampling rate
-
50 Ω input impedance (2.2 MΩ w/ optional preamplifiers)
-
Up to 200 Hz (256-ch) or 400 Hz (128-ch) trigger/frame rate
-
Up to 4096 points/frame/channel
-
Choice of input connectors for 128- or 256-probes or arrays
Legion
-
128 channels
-
6 to 54 dB programmable gain (42-90 dB w/ optional preamplifiers)
-
30 kHz to 50 MHz analog bandwidth at -6 dB (35 kHz to 61 MHz with optional preamplifiers)
-
12-bit resolution
-
80 MSPS sampling rate
-
50 Ω input impedance (2.2 MΩ w/ optional preamplifiers)
-
Up to 200 Hz trigger/frame rate
-
Up to 8192 points/frame/channel
-
Choice of input connectors for 128-channel probes or arrays
Legion AMP
The LEGION AMP is a standalone, high channel count, compact footprint preamplifier for integration with third party analog-to-digital converters/data acquisition devices. This is the same optional preamplifier used in the Legion ADC. The LEGION AMP boosts detection of small signals by +40 dB while minimizing background noise (high transmit voltages not supported).
Amplify input signals for third-party ADC units
Improves impedance matching with high-impedance transducer elements
Protective housing with stand-offs
Cannon DLM260 input/output connectors (other connectors may be available upon request)
Narrow housing design for fitting two side-by-side
Heavy duty latch for locking preamp connection
- 128 channels
- 40 dB amplification
- 2.2 MΩ input impedance
- 50 Ω output impedance
- 40 kHz to 45 MHz analog bandwidth at -6 dB
- Cannon DLM260 input/output connectors